standby track
- 機種
- Router(K)
- モード
- Inteface(M)
- デフォルト
- 無効
- IOS
- 10.3
- 試験レベル
- BCMSN
- 構文
- standby {Group-Number} track type module/number
- 使用例
Router#show standby FastEthernet0/0 - Group 200 Local state is Active, priority 100 Hellotime 3 sec, holdtime 10 sec Next hello sent in 1.708 Virtual IP address is 192.168.200.254 configured Active router is local Standby router is 192.168.200.17, priority 90 expires in 9.139 Virtual mac address is 0000.0c07.acc8 2 state changes, last state change 00:43:09 IP redundancy name is "hsrp-Fa0/0-200" (default) Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#int fa0/0 Router(config-if)#standby 200 track fastEthernet 0/1*1 Router(config-if)#end Router#show standby FastEthernet0/0 - Group 200 Local state is Active, priority 100 Hellotime 3 sec, holdtime 10 sec Next hello sent in 1.270 Virtual IP address is 192.168.200.254 configured Active router is local Standby router is 192.168.200.17, priority 90 expires in 7.344 Virtual mac address is 0000.0c07.acc8 2 state changes, last state change 00:44:14 IP redundancy name is "hsrp-Fa0/0-200" (default) Priority tracking 1 interface, 1 up:*2 Interface Decrement State FastEthernet0/1 10 Up Router#
- 解説
- インターフェーストラッキングを設定します。
- Tips
Counter: 6562,
today: 1,
yesterday: 0
最終更新: 2009-08-04 (火) 16:03:19 (JST) (5385d) by staff_mita