standby timer
- 機種
- Router(K)
- モード
- Inteface(M)
- デフォルト
- hello interval 3秒
hold time 10秒
- IOS
- 10.0
- 試験レベル
- BCMSN
- 構文
- standby {Group-Number} timer [hello interval] [hold time]
- 使用例
Router#show standby FastEthernet0/0 - Group 200 Local state is Active, priority 110, may preempt Preempt delay min 120 secs Hellotime 3 sec, holdtime 10 sec Next hello sent in 2.718 Virtual IP address is 192.168.200.254 configured Active router is local Standby router is 192.168.200.17, priority 100 expires in 8.970 Virtual mac address is 0000.0c07.acc8 2 state changes, last state change 02:21:55 IP redundancy name is "hsrp-Fa0/0-200" (default) Router#conf t Router(config)#int fa0/0 Router(config-if)#standby 200 timers ? <1-254> Hello interval in seconds msec Specify hello interval in milliseconds Router(config-if)#standby 200 timers 2 ? <11-255> Hold time in seconds Router(config-if)#standby 200 timers 2 7 ? advertise Redundancy advertisement interval in seconds <cr> Router(config-if)#standby 200 timers 2 7 Router(config-if)#end Router#show standby FastEthernet0/0 - Group 200 Local state is Active, priority 110, may preempt Preempt delay min 120 secs Hellotime 2 sec, holdtime 7 sec Next hello sent in 1.768 Virtual IP address is 192.168.200.254 configured Active router is local Standby router is 192.168.200.17, priority 100 expires in 4.716 Virtual mac address is 0000.0c07.acc8 2 state changes, last state change 02:22:23 IP redundancy name is "hsrp-Fa0/0-200" (default) Router#
- 解説
- HSRPの各種タイマーを設定します。
- Tips
- 参考リンク
- Google検索
Counter: 5743,
today: 1,
yesterday: 0
最終更新: 2009-08-04 (火) 16:03:19 (JST) (5385d) by staff_mita