Re: GNS3でVPCS間とL3-SWでPingが通らない

GNS3 management console.
Running GNS3 version 1.5.3 on Darwin (64-bit) with Python 3.5.2 Qt 5.6.0.
Copyright (c) 2006-2017 GNS3 Technologies.
Use Help -> GNS3 Doctor to detect common issues.

=> show device
Router ESW1 is stopped
  Local node ID is 1
  Server's VM ID is b9c53d8f-6579-4b3e-b222-34095245479d
  Dynamips ID is 1
  Hardware is Dynamips emulated Cisco c3725  with 128 MB RAM and 256 KB NVRAM
  Router's server runs on 192.168.56.103:3080, console is on port 5000, aux is on port None
  Image is c3725-adventerprisek9-mz.124-15.T14.image
  with idlepc value of 0x60c09aa0, idlemax of 500 and idlesleep of 30 ms
  1 MB disk0 size, 0 MB disk1 size
   slot 0 hardware is GT96100-FE with 2 ports
     FastEthernet0/0 is empty
     FastEthernet0/1 is empty
   slot 1 hardware is NM-16ESW with 16 ports
     FastEthernet1/0 is empty
     FastEthernet1/1 connected to PC1 on port Ethernet0
     FastEthernet1/10 is empty
     FastEthernet1/11 is empty
     FastEthernet1/12 is empty
     FastEthernet1/13 is empty
     FastEthernet1/14 is empty
     FastEthernet1/15 is empty
     FastEthernet1/2 connected to PC2 on port Ethernet0
     FastEthernet1/3 is empty
     FastEthernet1/4 is empty
     FastEthernet1/5 is empty
     FastEthernet1/6 is empty
     FastEthernet1/7 is empty
     FastEthernet1/8 is empty
     FastEthernet1/9 is empty

Device PC1 is stopped
  Local node ID is 2
  Server's VPCS device ID is 0edb911d-2473-4a19-a085-f6833879be0e
  VPCS's server runs on 192.168.56.103:3080, console is on port 5001
     Ethernet0 connected to ESW1 on port FastEthernet1/1

Device PC2 is stopped
  Local node ID is 3
  Server's VPCS device ID is e4142827-853c-4a19-bf9f-db27931b1e3e
  VPCS's server runs on 192.168.56.103:3080, console is on port 5002
     Ethernet0 connected to ESW1 on port FastEthernet1/2