Re: EtherChannelとVACLの設定

>arashi1977さん

早速のお返事ありがとうございます。
・sh verコマンドの実行結果
・コンフィグ投入時のコンソールログ
こちらを以下に記載致します。

〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜

・show version

Switch#show version
Cisco IOS Software, C2960 Software (C2960-LANBASE-M), Version 12.2(25)FX, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Wed 12-Oct-05 22:05 by pt_team

ROM: C2960 Boot Loader (C2960-HBOOT-M) Version 12.2(25r)FX, RELEASE SOFTWARE (fc4)

System returned to ROM by power-on

Cisco WS-C2960-24TT (RC32300) processor (revision C0) with 21039K bytes of memory.


24 FastEthernet/IEEE 802.3 interface(s)
2 Gigabit Ethernet/IEEE 802.3 interface(s)

64K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 00D0.BC05.E9DB
Motherboard assembly number : 73-9832-06
Power supply part number : 341-0097-02
Motherboard serial number : FOC103248MJ
Power supply serial number : DCA102133JA
Model revision number : B0
Motherboard revision number : C0
Model number : WS-C2960-24TT
System serial number : FOC1033Z1EY
Top Assembly Part Number : 800-26671-02
Top Assembly Revision Number : B0
Version ID : V02
CLEI Code Number : COM3K00BRA
Hardware Board Revision Number : 0x01

〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜
SwitchAの結果

//////////////////////////////////////////////////////////

・show vlan

Switch#show vlan

VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa0/2, Fa0/3, Fa0/4, Fa0/5
Fa0/6, Fa0/7, Fa0/8, Fa0/9
Fa0/13, Fa0/14, Fa0/15, Fa0/16
Fa0/17, Fa0/18, Fa0/19, Fa0/20
Fa0/21, Fa0/22, Fa0/23, Fa0/24
Gig1/1, Gig1/2
31 A1 active Fa0/1
32 A2 active
33 A3 active
51 B1 active
52 B2 active
53 B3 active
255 Native active
1002 fddi-default active
1003 token-ring-default active
1004 fddinet-default active
1005 trnet-default active
(以下略)

//////////////////////////////////////////////////////////

・show run

Switch#show run
(省略)
!
!
vtp mode transparent
!
!
vlan 31
name A1
!
vlan 32
name A2
!
vlan 33
name A3
!
vlan 51
name B1
!
vlan 52
name B2
!
vlan 53
name B3
!
vlan 255
name Native
!
interface FastEthernet0/1
switchport access vlan 31
switchport mode access
!
interface FastEthernet0/2
!
interface FastEthernet0/3
!
interface FastEthernet0/4
!
interface FastEthernet0/5
!
interface FastEthernet0/6
!
interface FastEthernet0/7
!
interface FastEthernet0/8
!
interface FastEthernet0/9
!
interface FastEthernet0/10
switchport trunk native vlan 255
switchport trunk allowed vlan 1,31-33,51-53,255
switchport mode trunk
!
interface FastEthernet0/11
switchport trunk native vlan 255
switchport trunk allowed vlan 1,31-33,51-53,255
switchport mode trunk
!
interface FastEthernet0/12
switchport trunk allowed vlan 255
switchport mode trunk
!
(省略)
!
interface Vlan1
ip address 192.168.10.2 255.255.255.0
(以下略)

〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜〜

SwitchBの結果

//////////////////////////////////////////////////////////

・show vlan

Switch#show vlan

VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa0/2, Fa0/3, Fa0/4, Fa0/5
Fa0/6, Fa0/7, Fa0/8, Fa0/9
Fa0/12, Fa0/13, Fa0/14, Fa0/15
Fa0/16, Fa0/17, Fa0/18, Fa0/19
Fa0/20, Fa0/21, Fa0/22, Fa0/23
Fa0/24, Gig1/1, Gig1/2
51 B1 active Fa0/1
52 B2 active
53 B3 active
255 Native active
1002 fddi-default active
1003 token-ring-default active
1004 fddinet-default active
1005 trnet-default active
(以下略)

//////////////////////////////////////////////////////////

・show run

Switch#show run
(省略)
!
!
vtp mode transparent
!
!
vlan 51
name B1
!
vlan 52
name B2
!
vlan 53
name B3
!
vlan 255
name Native
!
interface FastEthernet0/1
switchport access vlan 51
switchport mode access
!
interface FastEthernet0/2
!
interface FastEthernet0/3
!
interface FastEthernet0/4
!
interface FastEthernet0/5
!
interface FastEthernet0/6
!
interface FastEthernet0/7
!
interface FastEthernet0/8
!
interface FastEthernet0/9
!
interface FastEthernet0/10
switchport trunk native vlan 255
switchport trunk allowed vlan 1,51-53,255
switchport mode trunk
!
interface FastEthernet0/11
switchport trunk native vlan 255
switchport trunk allowed vlan 1,51-53,255
switchport mode trunk
!
(省略)
!
interface Vlan1
no ip address
shutdown
!
(以下略)

//////////////////////////////////////////////////////////

このような形で問題ないでしょうか。
私自身も何かミスや設定漏れが有りそうな気がするのですが、
お恥ずかしながら何度確認してもミスが分かりません。
(因みにスイッチ名はどちらもSwitch表示ですがトポロジ上はAとBで表示されています)

お手数ですがご教授願えますと幸いです。。。