1812Jの起動について

  • フォーラムは新サイトへ移行しました。
  • このフォーラムではゲスト投稿が禁止されています
前の投稿 - 次の投稿 | 親投稿 - 子投稿.1 .2 | 投稿日時 2018-8-20 20:12
Ponkel  新米   投稿数: 2
こんばんは

ciscoルーターの1812Jについてご質問をさせていただきます。
一度初期化をしようと

erase startup-config

を実行し

reload

を実行したところ、通常のユーザーモードには移行せず、ずっと再起動を繰り返すようになってしまいました。
以下その内容になります。どのように復旧すればよいかご教授いただけないでしょうか。その他必要な情報があればご指摘願います。

System Bootstrap, Version 12.3(8r)YH6, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2005 by cisco Systems, Inc.
C1800 platform with 131072 Kbytes of main memory with parity disabled

Readonly ROMMON initialized
program load complete, entry point: 0x80012000, size: 0xc0c0

Initializing ATA monitor library.......
program load complete, entry point: 0x80012000, size: 0xc0c0

Initializing ATA monitor library.......

program load complete, entry point: 0x80012000, size: 0x1c2dee4
Self decompressing the image : ################################################# ################################################################################ ################################################################################ ########################################################### [OK]

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706



Cisco IOS Software, C181X Software (C181X-ADVIPSERVICESK9-M), Version 15.1(4)M12 a, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2016 by Cisco Systems, Inc.
Compiled Tue 04-Oct-16 02:58 by prod_rel_team


This product contains ptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco ptographic products does not imply
third-party authority to import, export, distribute or use enption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco ptographic products may be found at:
pto/tool/stqrg.html" target="_blank">http://www.cisco.com/wwl/export/pto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Installed image archive
Cisco 1812-J (MPC8500) processor (revision 0x400) with 118784K/12288K bytes of m emory.
Processor board ID FHK101620S7, with hardware revision 0000

10 FastEthernet interfaces
1 ISDN Basic Rate interface
1 Virtual Private Network (VPN) Module
3368176K bytes of USB Flash usbflash1 (Read/Write)
31360K bytes of ATA CompactFlash (Read/Write)

SYSTEM INIT: INSUFFICIENT MEMORY TO BOOT THE IMAGE!



%Software-forced reload


11:46:14 UTC Mon Aug 20 2018: Unexpected exception to CPU: vector 1500, PC = 0x 8014655C, LR = 0x801464F4

-Traceback= 0x8014655Cz 0x801464F4z 0x824081C8z 0x832CFEA4z 0x822B3FE0z 0x822B41 40z 0x8229484Cz 0x82294964z 0x82294A08z 0x822955ECz 0x822C7888z 0x822D3600z 0x82 2BC978z 0x822DF98Cz 0x822DFF54z 0x816201A0z

CPU Register Context:
MSR = 0x02029220 CR = 0x28482042 CTR = 0x80D8AB60 XER = 0x00000000
R0 = 0x801464F4 R1 = 0x84F96FF0 R2 = 0xFFF97B88 R3 = 0x8465F1A8
R4 = 0x00000000 R5 = 0x00000000 R6 = 0x83F70000 R7 = 0x83450000
R8 = 0x02029220 R9 = 0x84100000 R10 = 0x00000000 R11 = 0x00000000
R12 = 0x24482048 R13 = 0xFFF99420 R14 = 0x83F80000 R15 = 0x83C21A60
R16 = 0x843C0000 R17 = 0x84F97044 R18 = 0x843C0000 R19 = 0x843C0000
R20 = 0x00000000 R21 = 0x00000000 R22 = 0x84ED0000 R23 = 0x00000000
R24 = 0x00000000 R25 = 0x00000000 R26 = 0x00002814 R27 = 0x00000000
R28 = 0x822B3FDC R29 = 0x84EB9CE0 R30 = 0x83F80000 R31 = 0x00000000

TEXT_START : 0x8001211C
DATA_START : 0x832D5000Free space check for flash:crashinfo_20180820-114614-UTC failed (0/7891)
Free space check for flash:crashinfo_20180820-114614-UTC failed (0/7891)
Free space check for flash:crashinfo_20180820-114614-UTC failed (0/7891)
Free space check for flash:crashinfo_20180820-114614-UTC failed (0/8192)
Free space check for flash:crashinfo_20180820-114614-UTC failed (0/8192)
Free space check for flash:crashinfo_20180820-114614-UTC failed (0/8192)

Writing crashinfo to flash:crashinfo_20180820-114624-UTC
No fault history 0x0

=== Flushing messages (11:46:25 UTC Mon Aug 20 2018) ===

Queued messages:
*Aug 20 11:46:25.863: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console d ebugging output.

*Aug 20 11:45:49.051: %IFMGR-7-NO_IFINDEX_FILE: Unable to open nvram:/ifIndex-ta ble No such file or directory
*Aug 20 11:45:50.503: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State change d to: Initialized
*Aug 20 11:45:51.023: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State change d to: Enabled
*Aug 20 11:46:09.067: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
*Aug 20 11:46:09.067: %LINK-3-UPDOWN: Interface FastEthernet1, changed state to up
*Aug 20 11:46:09.067: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0, chan ged state to down
*Aug 20 11:46:09.067: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:1, ch anged state to down
*Aug 20 11:46:09.067: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0:2, ch anged state to down
*Aug 20 11:46:09.983: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, cha nged state to down
*Aug 20 11:46:10.067: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern et0, changed state to down
*Aug 20 11:46:10.067: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern et1, changed state to down
*Aug 20 11:46:11.059: USB init complete.
*Aug 20 11:46:11.067: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to down
*Aug 20 11:46:11.067: %LINK-3-UPDOWN: Interface FastEthernet1, changed state to down
*Aug 20 11:46:11.211: %USBFLASH-5-CHANGE: usbflash1 has been inserted!
*Aug 20 11:46:12.199: %USBFLASH-4-FORMAT: usbflash1 contains unexpected values i n partition table or boot sector. Device needs formatting before use!
*Aug 20 11:46:14.003: %LINK-5-CHANGED: Interface BRI0, changed state to administ ratively down
*Aug 20 11:46:14.535: %SYS-2-MALLOCFAIL: Memory allocation of 10260 bytes failed from 0x822B3FDC, alignment 0
Pool: Processor Free: 36 Cause: Not enough free memory
Alternate Pool: I/O Free: 8392 Cause: Not enough free memory
-Process= "Init", ipl= 0, pid= 3
-Traceback= 80D90C80z 823E5DB4z 824081C8z 832CFEA4z 822B3FE0z 822B4140z 8229484C z 82294964z 82294A08z 822955ECz 822C7888z 822D3600z 822BC978z 822DF98Cz 822DFF54 z 816201A0z
*Aug 20 11:46:14.931: %LINEPROTO-5-UPDOWN: Line protocol on Interface NVI0, chan ged state to up
*Aug 20 11:46:15.863: %LINK-5-CHANGED: Interface FastEthernet1, changed state to administratively dow
*** System received a Software forced crash ***
signal= 0x17, code= 0x1500, context= 0x8459af58
PC = 0x8014655c, Vector = 0x1500, SP = 0x84f96ff0
前の投稿 - 次の投稿 | 親投稿 - 子投稿なし | 投稿日時 2018-8-20 22:06
arashi1977  長老 居住地: 広島  投稿数: 1715
残念ながらメモリ不足ですね…
引用:
SYSTEM INIT: INSUFFICIENT MEMORY TO BOOT THE IMAGE!
そもそもIOS15系を起動しようとしてるのにRAMが128MBでは無理があるので、増設されるのが良いかと思います。できれば256MBを…

今純正を手に入れるのは大変かと思いますが、互換品を探せば少しは安く上がるかも知れません。
前の投稿 - 次の投稿 | 親投稿 - 子投稿.1 | 投稿日時 2018-8-20 22:43
Ponkel  新米   投稿数: 2
ご回答ありがとうございます。
crashinfoがたまってしまったためかと思っていたため、ROMモニタ状態でメモリーをフォーマットしなければならないと考えていました。
起動するIOSによって必要なメモリが異なるんですね。

追って1点お伺いしたいのです。
現状ROMモニタ状態でしか操作できないのですが、IOSのダウングレードは可能でしょうか。
前の投稿 - 次の投稿 | 親投稿 - 子投稿なし | 投稿日時 2018-8-20 23:19
arashi1977  長老 居住地: 広島  投稿数: 1715

  >フォーラム検索へ


Copyright (c) 2020 Ping-t All rights reserved.