1: 2007-11-01 (木) 23:15:57 staff ソース 2: 2007-11-03 (土) 17:51:26 staff ソース
Line 1: Line 1:
-+#norelated 
 +#navi(Ciscoコマンド集) 
 +***&basename(nolink); 
 + 
 + 
 +:機種|Router(K) Switch(K) 
 + 
 +:モード| Enable(M) 
 + 
 +:デフォルト|- 
 + 
 +:IOS|10.0 
 + 
 + 
 +:試験レベル|CCNA 
 + 
 + 
 +:構文|show interfaces [ '''インタフェース''' ] 
 + 
 +&shiftnote(nohr); 
 + 
 +:使用例| 
 +<pre> 
 +Router#show interfaces serial 0 
 +Serial0 is up, line protocol is up 
 +  Hardware is HD64570 
 +  Internet address is 192.168.5.2/30 
 +  MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, 
 +     reliability 255/255, txload 1/255, rxload 1/255 
 +  Encapsulation HDLC, loopback not set 
 +  Keepalive set (10 sec) 
 +  Last clearing of "show interface" counters 04:02:46 
 +  Queueing strategy: fifo 
 +  Output queue 0/40, 0 drops; input queue 0/75, 0 drops 
 +  5 minute input rate 0 bits/sec, 0 packets/sec 
 +  5 minute output rate 0 bits/sec, 0 packets/sec 
 +     4822 packets input, 299644 bytes, 0 no buffer 
 +     Received 1687 broadcasts, 0 ruts, 0 giants, 0 throttles 
 +     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort 
 +     4762 packets output, 296559 bytes, 0 underruns 
 +     0 output errors, 0 collisions, 3 interface resets 
 +     0 output buffer failures, 0 output buffers swapped out 
 +     3 carrier transitions 
 +     DCD=up  DSR=up  DTR=up  RST=up  CTS=up 
 +Router# 
 +</pre> 
 +&shiftnote(nohr); 
 + 
 +:解説|このコマンドでは、インタフェースの状態や情報を確認することができます。 
 +特定のインタフェースを指定しないで、このコマンドを実行すると、そのデバイスの全てのインタフェースの情報を表示することができます。 
 +&shiftnote(nohr); 
 + 
 +:Tips| 
 +&shiftnote(nohr); 
 + 
 +:参考リンク|[[Google検索>Google検索:( cisco | ccna | ccnp | ccie ) -"cisco-records" -"ISBN" -"ISBN4" "show interfaces"]] 
 + 
 +:タグ|&tag(Router(K),Switch(K),,Enable(M),,,,,,,CCNA,,,,,,,);


トップ   差分 バックアップ 複製 名前変更 リロード   ページ新規作成 全ページ一覧 単語検索 最新ページの一覧   ヘルプ   最新ページのRSS 1.0 最新ページのRSS 2.0 最新ページのRSS Atom
Counter: 51328, today: 1, yesterday: 1
Copyright (c) 2020 Ping-t All rights reserved.
ログイン
ユーザ名 or E-Mailアドレス:

パスワード:







Contact

LPI-Japan Logo

LPI Logo